Aquavar Pump System and Aquavar CPC Variable Speed Pump Controllers
Commercial Constant Pressure Variable Speed Controller CPC. Start-up
“wizards” expedite the programming process:
• Removable control
panel/display.
• Fully backlit display with large text makes the control pad
easy to read.
• Transducer assembly (0-300 psi) included for constant
pressure.
• Protect the pump from cavitation, dead head and blocked
suction.
• Protect the motor from short circuit, phase loss, overload,
undervoltage,
overvoltage.
• Input choke reduces harmonics and provides
3-5% impedence line reactor.
• EMC/RFI filters reduce drive noise emissions
and interference.
• Fieldbus compatible, standard Modbus® Protocol
(SCADA).
• Capable of controlling up to 3 fixed speed pumps, with one
drive.
• Multipump control for up to 4 pumps, without additional PLC’s or
control
panels.
• Auto lead/lag and switching control built in.
•
Digital and analog control inputs.
• Relay outputs for pump run, fault and
other warnings.
Ratings and Enclosures
NEMA 1 (indoor use)
standard; other enclosures are available upon request.
1 – 200 HP (frame R1
– R6) wall mounted.
250 – 550 HP (frame R7 and R8) floor mounted.
Input
Power – 3 phase 380 V to 480 V +10%/-15% – Frequency 48 to 63 Hz
– 1 phase
208 V to 240 V +10%/-15% – .98 power factor
– 3 phase 208 V to 240 V
+10%/-15%
– 3 phase 575 V +10%/-15%
Output Power – 3 phase from 0 to
Vsupply (All motors must be 3 phase.)
– 0 to 60 Hz frequency
“wizards” expedite the programming process:
• Removable control
panel/display.
• Fully backlit display with large text makes the control pad
easy to read.
• Transducer assembly (0-300 psi) included for constant
pressure.
• Protect the pump from cavitation, dead head and blocked
suction.
• Protect the motor from short circuit, phase loss, overload,
undervoltage,
overvoltage.
• Input choke reduces harmonics and provides
3-5% impedence line reactor.
• EMC/RFI filters reduce drive noise emissions
and interference.
• Fieldbus compatible, standard Modbus® Protocol
(SCADA).
• Capable of controlling up to 3 fixed speed pumps, with one
drive.
• Multipump control for up to 4 pumps, without additional PLC’s or
control
panels.
• Auto lead/lag and switching control built in.
•
Digital and analog control inputs.
• Relay outputs for pump run, fault and
other warnings.
Ratings and Enclosures
NEMA 1 (indoor use)
standard; other enclosures are available upon request.
1 – 200 HP (frame R1
– R6) wall mounted.
250 – 550 HP (frame R7 and R8) floor mounted.
Input
Power – 3 phase 380 V to 480 V +10%/-15% – Frequency 48 to 63 Hz
– 1 phase
208 V to 240 V +10%/-15% – .98 power factor
– 3 phase 208 V to 240 V
+10%/-15%
– 3 phase 575 V +10%/-15%
Output Power – 3 phase from 0 to
Vsupply (All motors must be 3 phase.)
– 0 to 60 Hz frequency
Installation and Operation Manual
Aquavar CPC – 600 volt addendum to Instruction Manual – ADDEN600V Aquavar CPC Quick Reference Start-Up Guide – AQCPCQR MODBUS – Aquavar CPC Instruction Manual – ADAQCPC Aquavar CPC -Typical Submersible Constant Pressure System – SubInstall Aquavar CPC – Typical Constant Pressure Booster System –
BoosterConPress Instruction Manual Supplement – IM154 Aquavar CPC Multi-Drive Connection Instructions Aquavar 56 Instruction Manual – IM098 Aquavar Instruction Manual – IM043
Instruction Manual
IM250 R01 – Aquavar CPC-FD Variable Speed Drive with Fused Disconnect (supplement to IM167)
IM167 – Aquavar CPC Instruction Manual
BoosterConPress
Instruction Manual
IM250 R01 – Aquavar CPC-FD Variable Speed Drive with Fused Disconnect (supplement to IM167)
IM167 – Aquavar CPC Instruction Manual