Aquavar™ SPD – Variable Speed Surface Pump Controller

Commercial Variable Speed Surface Pump Controller Aquavar SPD


A variable speed pump controller made specifically for single pump booster
applications. Comes complete with pressure transducer and standard NEMA 3R
outdoor rated enclosure.


Applications:
Water pumps serving commercial buildings.
Pressure
boosting for light industry, wash systems, filtration.
Rural water and
municipal systems
BRGLCAPA R1 – Variable Speed Product Line  Brochure

---

Features and Benefits

• Easy Set-up: Pre-set for surface motor characteristics. Pre-wired and tested
  transducer. Touch button pressure setting. No complicated menus or electrical
  jargon to cope with. Total set up time including wiring is less than 30
  minutes.


• NEMA 3R: Outdoor rated enclosure eliminates the need for separate cover
  panels required by standard NEMA 1 enclosures.


• Dual Phase: The same drive can be used for either three phase or single
  phase input (de-rated). Both configurations are UL/CUL approved for inventory
  flexibility.


• Transducer: As with all Goulds Water Technology drives, the pressure
  transducer is included with the drive so there is no need for separate sourcing
  and compatibility checks. The transducer is pre-wired and tested.

 

• Full Diagnostics: In addition to typical electrical protection and
  diagnostics, the S-Drive has a full range of pump protection features such as
  bound pump or motor shut down, low water or loss of prime shut down. These added
  features require no added input devices.


• Program Security: The flashing LED status indicator will not fade in outdoor
  use the way LCD screens do, and the internal single push button discourages
  tampering by untrained operating or maintenance personnel.


• Remote on/off: Permits external control by timers (irrigation), float or
  pressure switches (tank draining) or manual control. Reduces the need for
  separate patch panels.


• Hand/Auto Option: Allows the drive to be run full speed for longer periods
  of time as in the case of system start up. Turning the control back to auto
  resumes the automatic pressure tracking and control.


• Remote Monitoring: External monitors may be connected to the drive for pump
  running speed (Hz), pump on, and system fault. The fault indicator can also be
  connected to devices like an auto-dialer. This enables control of pumps and
  drives in un-manned locations.


• Dual Set Point: The S-Drive has the capability to be programmed with two
  pressure set points. An external contact such as a timer can be used to change
  between them, so that a booster pump serving both a building and an irrigation
  system can do both jobs without manual resets.

Installation and Operation Manual

S-Drive™ Constant Pressure Aquavar SPD™ Variable Speed Pump  Control – IM213

Instruction Manual

IM234 R01 – Moisture Sensor Relay